Unidirectional tires usually have a v-shaped or asymmetrical tread to resist hydroplaning [source: Tire Rack ]. Rotate your unidirectional tires Since unidirectional tires are meant to roll only in one direction, they must stay on the same side of the vehicle.
When it's time to rotate them, simply swap the front and rear driver-side tires. Do the same for the passenger-side tires [source: Tire Rack ]. Rotate your multidirectional tires on front-wheel-drive cars Tire rotation is different for front-wheel-drive and rear-, four- or all-wheel-drive cars. For front-wheel-drive cars, cross the rear tires to the front and slide the front tires back, as follows: Move the rear driver-side tire to the front passenger-side and the rear passenger-side tire to the front driver-side.
Slide the front driver-side tire to the rear driver-side and the front passenger-side tire to the rear passenger-side [source: Goodyear ]. Is moving tires between sides of a vehicle good or bad, and why? Improve this question. The Googles seem to think that the rotation guide you posted is from: Tire Rack. They have other charts for different cases as well. Add a comment. Active Oldest Votes. There is some history to the answer. Improve this answer. JPhi JPhi Are you sure you don't have this backwards?
To my knowledge, bias was good with crisscross and radial not. I'm sure you're going to hear it both ways, but this has always been my understanding. I suspect reality is that early radial tires had this issue, or people thought they might have this issue. I have to think if modern non directional radial tires could not be reversed the tire manufacturers would be clearly warning about it.
They may as well make them all directional for that matter. Bart Bart 2, 10 10 silver badges 25 25 bronze badges. Trust our myth-busting professionals to tell you the truth about your vehicle.
To schedule a tire rotation or maintenance service today, call Christian Brothers Automotive in Olathe, Kansas. Blog Home May 26, If you rotate your tires, everything will be fine Tire rotations are an essential part of vehicle maintenance, but complete tire maintenance is bigger than tire rotations.
Campbell spent over 15 years as both a manager and an under-car specialist in the automotive repair industry. Prior to that, he managed two different restaurants for over 15 years. Campbell began his professional writing career in with the publication of his first book.
Step 1 Locate the owner's manual of your vehicle and look up the manufacturer's recommended method of tire rotation. Step 2 Park the vehicle on a flat, level paved or concrete surface, apply the parking brake and remove the keys from the ignition. Step 3 Break the lug nuts loose on all four tires, using the breaking bar and socket. Step 4 Lift one axle of the vehicle at a time and secure it on jack stands all four either under the frame or on the rocker panels.
Step 5 Determine if your steel belted tires have a directional pattern. Step 6 Follow the recommended rotation pattern of the tires located in the owner's manual, if applicable. Step 7 Crisscross the tires on a front-wheel drive vehicle by taking the front tires and moving them straight to the back axle.
0コメント